I have been slowly picking away at the frames. Completing them as far as possible on the bench which does add quite a bit of time for me. They are all assembled as of September 09 2022 but still require finishing with with fillets and blocking. I will then coat every thing with epoxy again as there are some areas with construction and and sanding that are now do not have epoxy on them, and some pieces I missed during the initial coating of all parts. The screen shot from Facebook is from Martell Marine (Gregg Martell) https://www.facebook.com/search/top/?q=martell%20marine Every joint could be filleted, this is lot of work and material (time and money) all on its own.
Frames set up had to be readjusted once I used the side panels and base panel to check the length.
I added extra supports to the frame/jig to try and limit movement when applying stringers, as it was relatively to move a frame.
No comments:
Post a Comment