Search This Blog

Sunday, January 23, 2022

The Minimum Required Blog Posts #themusts

 1. Making frames.

2. Setting up fames and stingers.

3. Hull plating

4. Hull epoxy sheeting and fairing.

5. Roll hull and Deck plating/Glass-fairing.

6. Internal plywood fit and crash box.

5. Keel floors.

6. Weighing hull.

7. Rudder construction. Gudgeon/pintle and all chain plate fittings.

8. Keel construction and weighing.

9. Companionway hatch, Watertight doors and deck hatches , vents and windows.

Companionway way hatch - Clue marine 500mmx700mm 

D1 hatch - Clue marine 500mmx700mm

Air circulation hatch aft of mast - Clue marine 

Main forward deck hatch -  lewmar 50 

10. Mounting of Handrails, pushpit/pulpit, Bowsprit, safety harness attachments and towing bow bollard including backing plates.

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Rudder construction

 Rudder   1820mm x 405mm x 40mm laminated Douglas fir, recovered from granary - clean up 4000mm x 220mm, cut to 1840mm - set up table saw a...

  • Keel Steel
     5/8 16mm for vertical part. 3/8 9.25mm for horizontal  Had parts laser cut by Precision Laser & Fab Inc Saskatoon.   
  • Frame work, fillets and hanging frames on jig.
     I have been slowly picking away at the frames.  Completing them as far as possible on the bench which does add quite a bit of time for me. ...
  • Transom Layout
    https://youtu.be/cVDs2WrUOvY Haven’t posted much to the blog as it’s all pretty repetitive at the moment but I wanted to write something abo...